Kollár Ádám Ferenc levelezése
REAL-EOD (Library of the Hungarian Academy of Sciences and the Information Center Oriental Collection)Published 1 January 2000
Sotiris Bersimis
Citations586
Generate an AI Snapshot to get a quick, structured summary of this paper.
Study Snapshot
ObjectiveStudy objective
MethodsResearch methodology
PopulationPopulation studied
Sample sizeSample sizes
OutcomesStudy outcomes here
ResultsStudy results comes here
LimitationsResearch study limitations comes here
A concise AI-generated summary of the paper will appear here once you click Generate AI Snapshot.
Abstract
Abstract In this paper we discuss the basic procedures for the implementation of multivariate statistical process control via control charting. Furthermore, we review multivariate extensions for all kinds of univariate control charts, such as multivariate Shewhart‐type control charts, multivariate CUSUM control charts and multivariate EWMA control charts. In addition, we review unique procedures for the construction of multivariate control charts, based on multivariate statistical techniques such as principal components analysis (PCA) and partial least squares (PLS). Finally, we describe the most significant methods for the interpretation of an out‐of‐control signal. Copyright © 2006 John Wiley & Sons, Ltd.
Keywords
Decision SciencesMathematicsEngineering
AIChE JournalMonitoring batch processes using multiway principal component analysis
1,479 Citations1994Paul Nomikos, John F. MacGregor
The approach is contrasted with other approaches which use theoretical or knowledge-based models, and its potential is illustrated using a detailed simulation study of a semibatch reactor for the production of styrene-butadiene latex.
Chemometrics and Intelligent Laboratory SystemsDisturbance detection and isolation by dynamic principal component analysis
1,459 Citations1995Wenfu Ku, Robert H. Storer +1 more
This paper uses a well-known ‘time lag shift’ method to include dynamic behavior in the PCA model and demonstrates the effectiveness of the proposed methodology on the Tennessee Eastman process simulation.
TechnometricsMultivariate SPC Charts for Monitoring Batch Processes
1,380 Citations1995Paul Nomikos, John F. MacGregor
The problem of using time-varying trajectory data measured on many process variables over the finite duration of a batch process is considered and multiway principal-component analysis is used to compress the information contained in the data trajectories into low-dimensional spaces that describe the operation of past batches.
Control Engineering PracticeStatistical process control of multivariate processes
1,240 Citations1995John F. MacGregor, Theodora Kourti
An overview of multivariate statistical methods use for the statistical process control of both continuous and batch multivariate processes and examples are provided of their use for analysing the operations of a mineral processing plant, for on-line monitoring and fault diagnosis of a continuous polymerization process and for the on- line monitoring of an industrial batch polymerization reactor.
TechnometricsA Multivariate Exponentially Weighted Moving Average Control Chart
1,148 Citations1992Cynthia A. Lowry, William H. Woodall +2 more
Journal of Process ControlThe process chemometrics approach to process monitoring and fault detection
846 Citations1996Barry M. Wise, Neal B. Gallagher
The state-of-the-art of process chemometrics and current trends in research and applications are reviewed.
AIChE JournalProcess monitoring and diagnosis by multiblock PLS methods
772 Citations1994John F. MacGregor, Christiane Jaeckle +2 more
More detailed diagnostic methods based on interrogating the underlying PCA /PLS models are developed, which show those process variables which are the main contributors to any deviations that have occurred, thereby allowing one to diagnose the cause of the event more easily.
Journal of the American Statistical AssociationStatistical Methods for Quality Improvement
758 Citations2000SRJ, Thomas P. Ryan
Chemometrics and Intelligent Laboratory SystemsMulti-way partial least squares in monitoring batch processes
733 Citations1995Paul Nomikos, John F. MacGregor
Multivariate statistical procedures for monitoring the progress of batch processes are developed using multi-way partial least squares for extracting information from the process measurement variable trajectories that is more relevant to the final quality variables of the product.
IIE TransactionsA review of multivariate control charts
682 Citations1995Cynthia A. Lowry, Douglas C. Montgomery
Journal of Quality TechnologyMultivariate SPC Methods for Process and Product Monitoring
668 Citations1996Theodora Kourti, John F. MacGregor
Statistical process control methods for monitoring processes with multivariate measurements in both the product quality variable space and the process variable space are considered.
Chemometrics and Intelligent Laboratory SystemsFault diagnosis in chemical processes using Fisher discriminant analysis, discriminant partial least squares, and principal component analysis
621 Citations2000Leo H. Chiang, Evan L. Russell +1 more
It is shown that FDA and DPLS are more proficient than PCA for diagnosing faults, both theoretically and by applying these techniques to simulated data collected from the Tennessee Eastman chemical plant simulator.
Journal of Quality TechnologyResearch Issues and Ideas in Statistical Process Control
613 Citations1999William H. Woodall, Douglas C. Montgomery
An overview of current research on control charting methods for process monitoring and improvement and a historical perspective and ideas for future research are given.
Neural Network Fundamentals with Graphs, Algorithms and Applications
593 Citations1995N.K. Bose, Pengfei Liang
This chapter explains the basics of neuroscience and artificial neuron models graphs algorithms and applications of neural networks approach to solving hard problems.
Journal of Quality TechnologyMultivariate Control Charts for Individual Observations
581 Citations1992Nola D. Tracy, John C. Young +1 more
P correlated process characteristics are being measured simultaneously and special causes of variation are identified in order to establish control and to obtain control.
Journal of Quality TechnologyUsing Control Charts to Monitor Process and Product Quality Profiles
531 Citations2004William H. Woodall, Dan J. Spitzner +2 more
This expository paper discusses some of the general issues involved in using control charts to monitor such process- and product-quality profiles and reviews the SPC literature on the topic.
TechnometricsMultivariate Generalizations of Cumulative Sum Quality-Control Schemes
510 Citations1988Ronald B. Crosier
Chemometrics and Intelligent Laboratory SystemsGeneralized contribution plots in multivariate statistical process monitoring
498 Citations2000Johan A. Westerhuis, Stephen P. Gurden +1 more
Control limits for both types of contributions are introduced to show the relative importance of a contribution compared to the contributions of the corresponding process variables in the batches obtained under normal operating conditions.
Journal of Quality TechnologyComparisons of Multivariate<i>CUSUM</i>Charts
498 Citations1990Joseph J. Pignatiello, George C. Runger
Journal of Quality TechnologyControversies and Contradictions in Statistical Process Control
494 Citations2000William H. Woodall
Journal of Quality TechnologyOn the Monitoring of Linear Profiles
481 Citations2003Keunpyo Kim, Mahmoud A. Mahmoud +1 more
TechnometricsMultivariate Generalizations of Cumulative Sum Quality-Control Schemes
445 Citations1988Ronald B. Crosier
Society for Industrial and Applied Mathematics eBooksMultivariate Statistical Process Control with Industrial Applications
427 Citations2002Robert Mason, John C. Young
This applied, self-contained text provides detailed coverage of the practical aspects of multivariate statistical process control (MVSPC) based on the application of Hotelling's T2 statistic.
Chemical Engineering ScienceOn-line batch process monitoring using dynamic PCA and dynamic PLS models
424 Citations2002Junghui Chen, Kun-Chih Liu
The proposed BDPCA and BDPLS models only collect the previous data during the batch run without expensive computations to anticipate the future measurements, leading to simple monitoring charts, easy tracking of the progress in each batch run and monitoring the occurrence of the observable upsets.
TechnometricsMultivariate CUSUM Quality-Control Procedures
394 Citations1985William H. Woodall, Matoteng M. Ncube
Journal of Quality TechnologyDecomposition of <i>T</i> 2 for Multivariate Control Chart Interpretation
386 Citations1995Robert Mason, Nola D. Tracy +1 more
Journal of Quality TechnologyRegression Adjustment for Variables in Multivariate Quality Control
354 Citations1993Douglas M. Hawkins
Journal of Quality TechnologyNonparametric Control Charts: An Overview and Some Results
350 Citations2001S. Chakraborti, P. van der Laan +1 more
An overview of the literature on nonparametric or distribution-free control charts for univariate variables data is presented and connections to some areas of active research are made, such as sequential analysis, that are relevant to process control.
Journal of Process ControlNon-parametric confidence bounds for process performance monitoring charts
344 Citations1996E.B. Martin, A.J. Morris
Journal of Process ControlAnalysis, monitoring and fault diagnosis of batch processes using multiblock and multiway PLS
337 Citations1995Theodora Kourti, Paul Nomikos +1 more
Powerful procedures for diagnosing assignable causes for the occurrence of a fault by interrogating the underlying latent variable model for the contributions of the variables to the observed deviation are presented.
TechnometricsPhase I Analysis of Linear Profiles With Calibration Applications
334 Citations2004Mahmoud A. Mahmoud, William H. Woodall
This work studies the phase I analysis of data when the quality of a process or product is characterized by a linear function and proposes a method based on using indicator variables in a multiple regression model that has competitive performance relative to other methods in terms of the probability of a signal.
International Journal of Adaptive Control and Signal ProcessingApplication of latent variable methods to process control and multivariate statistical process control in industry
327 Citations2005Theodora Kourti
An overview of the latest developments in multivariate statistical process control and its application for fault detection and isolation in industrial processes is given and a critical review of the methodology is provided and how it is transferred to the industrial environment is described.
Journal of ChemometricsMultivariate dynamic data modeling for analysis and statistical process control of batch processes, start‐ups and grade transitions
276 Citations2003Theodora Kourti
This paper first takes a critical look at the true nature of batch process data, then some of the methods that have appeared in the literature are examined as to their assumptions, their advantages and disadvantages and their range of applicability.
Journal of Quality TechnologyRobustness of the EWMA Control Chart to Non-Normality
260 Citations1999Connie M. Borror, Douglas C. Montgomery +1 more
Rational subgroups of size n = 1 are frequently encountered in process monitoring and control and the Shewhart control chart for individuals is often used in these situations.
Journal of Quality TechnologyA Comparison of Multivariate Control Charts for Individual Observations
251 Citations1996Joe H. Sullivan, William H. Woodall
Journal of Quality TechnologyA Practical Approach for Interpreting Multivariate <i>T</i><sup>2</sup> Control Chart Signals
250 Citations1997Robert Mason, Nola D. Tracy +1 more
A persistent problem in multivariate control chart procedures is the interpretation of a signal and a procedure for decompressing signals is proposed.
Journal of Quality TechnologyA Review and Analysis of Cause-Selecting Control Charts
248 Citations1993Mark R. Wade, William H. Woodall
This work proposes using prediction limits with cause-selecting charts to improve their statistical performance and its relationship with the multivariate T2 chart.
Quality and Reliability Engineering InternationalAn anomaly detection technique based on a chi‐square statistic for detecting intrusions into information systems
246 Citations2001Nong Ye, Qiang Chen
This paper presents an anomaly detection technique based on a chi‐square statistic that builds a profile of normal events in an information system—a norm profile and detects a large departure as an anomaly—a likely intrusion.
Journal of the American Statistical AssociationControl Charts for Multivariate Processes
241 Citations1995Regina Y. Liu
IEEE Transactions on Semiconductor ManufacturingSupervisory run-to-run control of polysilicon gate etch using in situ ellipsometry
226 Citations1994Stephanie Watts Butler, Jerry A. Stefani
Journal of Quality TechnologyDesigning a Multivariate EWMA Control Chart
225 Citations1997Sharad S. Prabhu, George C. Runger
A multivariate exponentially weighted moving average control chart can be used to improve the detection of small shifts in multivariate statistical process control.
Journal of ChemometricsDealing with missing data in MSPC: several methods, different interpretations, some examples
223 Citations2002Francisco Moreno, Alberto Ferrer
The KDR method is shown to be statistically superior to the other methods, except the TSR method in which the matrix to be inverted is of a much smaller size and the efficiency of the methods is studied through simulations based on an industrial data set.
Computers & Chemical EngineeringA new multivariate statistical process monitoring method using principal component analysis
222 Citations2001Manabu Kano, Shinji Hasebe +2 more
The results clearly show that the monitoring performance of MPCA is considerably better than that of the conventional MSPC method and that dynamic monitoring is superior to static monitoring.
TechnometricsA Rank-Based Multivariate CUSUM Procedure
212 Citations2001Peihua Qiu, Douglas M. Hawkins
This work considers statistical process control when measurements are multivariate and proposes a cumulative sum (CUSUM) procedure, which is based on the cross-sectional antiranks of the measurements, which can detect shifts in all directions.
Computers & Chemical EngineeringExperiences with industrial applications of projection methods for multivariate statistical process control
200 Citations1996Theodora Kourti, Jennifer Lee +1 more
This paper gives a brief overview of multivariate statistical methods and illustrates their use for process monitoring and fault diagnosis with applications to a wide range of industrial batch and continuous processes.
Journal of Quality TechnologyRobustness to Non-Normality of the Multivariate EWMA Control Chart
193 Citations2002Zachary G. Stoumbos, Joe H. Sullivan
Control Engineering PracticeRecursive partial least squares algorithms for monitoring complex industrial processes
189 Citations2003Xun Wang, Uwe Krüger +1 more
It is shown that the application of recursive partial least squares (RPLS) algorithms together with adaptive confidence limits can lead to a considerable reduction in the number of false alarms.
International Journal of Production ResearchA kernel-distance-based multivariate control chart using support vector methods
189 Citations2003Rui-Xiang Sun, Fugee Tsung
A developed multivariate control chart is developed based on the kernel distance, which is a measure of the distance between the 'kernel centre' and the incoming new sample to be monitored, which can be calculated using support vector methods.
Journal of Quality TechnologyRobust Estimation in Multivariate Control Charts for Individual Observations
172 Citations2003N José Alberto Vargas
Simulation studies show that the T2 control chart using the minimum volume ellipsoid (MVE) estimators is effective in detecting any reasonable number of outliers.
Chemical Engineering ScienceMultivariate statistical process control of batch processes based on three-way models
166 Citations2000D.J. Louwerse, Age K. Smilde
Statistica NeerlandicaMultivariate statistical process control—recent results and directions for future research
163 Citations1994S.J. Wierda
This paper reviews several of these multivariate statistical process control methods and points out where to fill up gaps in the theory.
Journal of Chromatography AStatistical quality control applied to ion chromatography calibrations
161 Citations1998Frederick S. Stover, Robert V Brill
IIE TransactionsWavelet-based multiscale statistical process monitoring: A literature review
141 Citations2004Rajesh Ganesan, Tapas K. Das +1 more
The recent literature contains several wavelet-decomposition-based multiscale process monitoring approaches including many real life process monitoring applications that are shown to be effective in handling different data types and likely to perform better than existing single scale approaches.
Journal of Quality TechnologyIdentification and Quantification in Multivariate Quality Control Problems
139 Citations1994Anthony J. Hayter, Kwok‐Leung Tsui
International Journal of Production ResearchProcess monitoring for multiple count data using generalized linear model-based control charts
134 Citations2003Katina R. Skinner, Douglas C. Montgomery +1 more
Journal of the American Statistical AssociationA Markov Chain Model for the Multivariate Exponentially Weighted Moving Averages Control Chart
134 Citations1996George C. Runger, Sharad S. Prabhu
Journal of the Royal Statistical Society Series D (The Statistician)A nonparametric multivariate cumulative sum procedure for detecting shifts in all directions
132 Citations2003Peihua Qiu, Douglas M. Hawkins
Journal of Quality TechnologyThe Autoregressive<i>T</i>2 Chart for Monitoring Univariate Autocorrelated Processes
130 Citations2002Daniel W. Apley, Fugee Tsung
International Journal of Production ResearchControl chart for multivariate attribute processes
128 Citations1998X. S. Lu
Journal of the American Statistical AssociationA Markov Chain Model for the Multivariate Exponentially Weighted Moving Averages Control Chart
125 Citations1996George C. Runger, Sharad S. Prabhu
International Journal of Production ResearchHotelling's T <sup>2</sup> control chart with adaptive sample sizes
121 Citations1996Francisco Aparisi
Journal of Quality TechnologyAssessment of Multivariate Process Control Techniques
120 Citations1997Robert Mason, Charles W. Champ +3 more
Communication in Statistics- Theory and MethodsContributors to a multivariate statistical process control chart signal
118 Citations1996George C. Runger, Frank B. Alt +1 more
Industrial & Engineering Chemistry ResearchStatistical Process Control Charts for Batch Operations Based on Independent Component Analysis
110 Citations2004Hamza Albazzaz, Xue Z. Wang
A new method for deriving SPC charts based on ICA is proposed, which is inappropriate to use ICA in the same way as PCA to derive Hotelling's T2 and SPE charts, because the independent components are separated by maximizing their non-Gaussianity.
TechnometricsQuality Control Methods for Multivariate Binomial and Poisson Distributions
108 Citations1973H. I. Patel
Journal of Process ControlPerformance monitoring of a multi-product semi-batch process
106 Citations2001Stephanie Lane, E.B. Martin +2 more
AIChE JournalPrincipal‐component analysis of multiscale data for process monitoring and fault diagnosis
103 Citations2004Seongkyu Yoon, John F. MacGregor
The proposed method can enhance fault detection and isolation (FDI) performance when the frequency content of a fault effect is confined to a narrow-frequency band, and offer no real advantage when the fault frequency content is not localized.
Journal of Applied StatisticsA multivariate exponentially weighted moving average control chart for monitoring process variability
95 Citations2003Arthur B. Yeh, Dennis K. J. Lin +2 more
It is demonstrated that the EWMA V-chart is superior to the |S|-chart in detecting small changes in process variability and the combined MEWMA and EWMA M-chart and V-charts provide the best control procedure.
Journal of the American Statistical AssociationControl Charts for Dependent and Independent Measurements Based on Bootstrap Methods
94 Citations1996Regina Y. Liu, Jen Tang
This work develops some valid control charts for dependent data and for independent data that are not necessarily “nearly” normal.
Communications in Statistics - Simulation and ComputationA New Multivariate Control Chart for Monitoring Both Location and Dispersion
89 Citations2005Gemai Chen, Smiley W. Cheng +1 more
Journal of Quality TechnologyThe Performance of Multivariate Control Charts in the Presence of Measurement Error
89 Citations2001Kenneth W. Linna, William H. Woodall +1 more
Industrial & Engineering Chemistry ResearchFault Detection Based on a Maximum-Likelihood Principal Component Analysis (PCA) Mixture
86 Citations2005Sang Wook Choi, Elaine Martin +2 more
A learning algorithm that helps determine model structure is proposed, resulting in the efficient determination of a MLPCA mixture model, and a two-step fault detection method is proposed.
TechnometricsMultivariate Profile Charts for Statistical Process Control
85 Citations1994Camil Fuchs, Yoav Benjamini
TechnometricsA Self-Starting Control Chart for Multivariate Individual Observations
85 Citations2002Joe H. Sullivan, L. Allison Jones
It is shown that for self-starting charts, performance comparisons based on the average run length can be misleading and a new performance criterion is introduced.
Journal of Applied StatisticsMultivariate Quality Control Chart for Autocorrelated Processes
84 Citations2004A. A. Kalgonda, Shilpa Kulkarni
This paper considers the problem of monitoring the mean vector of a process in which observations can be modelled as a first-order vector autoregressive VAR process and proposes a control chart called Z-chart which is based on the single step finite intersection test (Timm, 1996).
Industrial & Engineering Chemistry ResearchModel Predictive Monitoring for Batch Processes
84 Citations2004Salvador García‐Muñoz, Theodora Kourti +1 more
This work demonstrates that using the missing data option and solving the score estimation problem with an appropriate method are equivalent to the use of an accurate adaptive forecast model for the future samples over the shrinking horizon of the remainder of the batch.
Computers & Chemical EngineeringNon-linear principal components analysis for process fault detection
83 Citations1998Feng Jia, E.B. Martin +1 more
Journal of ChemometricsMultivariate statistical process control using mixture modelling
82 Citations2005Uwe Thissen, H. Swierenga +4 more
Combining mixture modelling with MSPC (MM‐MSPC) leads to an approach in which non‐normally distributed NOC regions can be described accurately, and a better description of the process data is given compared with standard M SPC and the clusters found can be used for a more detailed process analysis and interpretation.
Control Engineering PracticeWavelets and non-linear principal components analysis for process monitoring
82 Citations1999R.‐F. Shao, Feng Jia +2 more
Journal of Process ControlIntelligent process monitoring by interfacing knowledge-based systems and multivariate statistical monitoring
79 Citations2000Aras Norvilas, Antoine Negiz +2 more
An intelligent process monitoring and fault diagnosis environment has been developed by interfacing multivariate statistical process monitoring techniques and knowledge-based systems for monitoring multivariable process operation.
Journal of Quality TechnologyProjections and the <i>U</i> <sup>2</sup> Multivariate Control Chart
76 Citations1996George C. Runger
IIE TransactionsChange-point detection of mean vector or covariance matrix shifts using multivariate individual observations
76 Citations2000Joe H. Sullivan, William H. Woodall
Quality and Reliability Engineering InternationalStatistical process monitoring with principal components
74 Citations1996Christina M. Mastrangelo, George C. Runger +1 more
Journal of Quality TechnologyApplying Hotelling's<i>T</i>2 Statistic to Batch Processes
74 Citations2001Robert Mason, Youn-Min Chou +1 more
The usefulness of Hotelling's T2 statistic for monitoring batch processes in both Phase I and Phase II operations is shown and a variety of data sets taken from different types of industrial batch processes are used.
IIE TransactionsA multivariate double EWMA process adjustment scheme for drifting processes
74 Citations2002Enrique Del Castillo, Ramkumar Rajagopal
IIE TransactionsA likelihood-ratio-based EWMA control chart for monitoring variability of multivariate normal processes
71 Citations2004Arthur B. Yeh, Longcheen Huwang +1 more
Communications in Statistics - Simulation and ComputationMultivariate statistical process monitoring and diagnosis with grouped regression‐adjusted variables
70 Citations1999Daryl J. Hauck, George C. Runger +1 more
This paper identifies a potentially common MSPM scenario and extends the idea of using process knowledge to determine an appropriate control statistic for assignable cause detection and identification.
Journal of Quality TechnologyImproving the Sensitivity of the <i>T</i> 2 Statistic in Multivariate Process Control
70 Citations1999Robert Mason, John C. Young
Sequential AnalysisEwma charts for multivariate time series
70 Citations1997Holger Kramer, Ludwig Schmid
Quality and Reliability Engineering InternationalRobustness properties of multivariate EWMA control charts
67 Citations2002Murat Caner Testik, George C. Runger +1 more
Multivariate Quality Control
66 Citations1998Camil Fuchs, Ron S. Kenett
Quality control with multivariate data the multivariate normal distribution in quality control quality control with externally assigned targetsquality control with internal targets - multivariate process capability studies quality controlwith targets from a reference sample.
Journal of Statistical Computation and SimulationAn integral equation for the in-control average run length of a multivariate exponentially weighted moving average control chart
63 Citations1995Steven E. Rigdon
Quality and Reliability Engineering InternationalStatistically constrained economic design of the multivariate exponentially weighted moving average control chart
62 Citations2001Wade E. Molnau, Douglas C. Montgomery +1 more
Computers & Chemical EngineeringApplication of multi-way principal components analysis to nuclear waste storage tank monitoring
61 Citations1996Neal B. Gallagher, Barry M. Wise +1 more
The MSPC technique was demonstrated for a nuclear waste storage tank that undergoes periodic agitation from a mixing pump and used multi-way principal components analysis to develop a statistical model of the process based on historical data.
Communications in Statistics - Simulation and ComputationGENERALIZED VARIANCE CHART DESIGN WITH ADAPTIVE SAMPLE SIZES. THE BIVARIATE CASE
60 Citations2001Francisco Aparisi, José Jabaloyes +1 more
Communication in Statistics- Theory and MethodsTHE CONTROL CHART FOR INDIVIDUAL OBSERVATIONS FROM A MULTIVARIATE NON-NORMAL DISTRIBUTION
60 Citations2001Youn-Min Chou, Robert Mason +1 more
MULTIVARIATE CUMULATIVE SUM CONTROL CHARTS BASED ON PROJECTION PURSUIT
59 Citations2001Hung-Man Ngai, Jian Zhang
…